Trane L8V1A040U3VSBA furnace filter size
This furnace takes a 14 x 25 x 1 filter (upflow (return opening; external) or single/any (catalog)).
Every filter option for this model
| Where return air enters | Filter size (inches) | How many |
|---|---|---|
| upflow (return opening; external) | 14 x 25 x 1 | 1 |
| single/any (catalog) | 14 x 25 x 1 | 1 |
Where the filter goes
External to unit; not factory supplied. Natural gas only, Ultra-Low NOx (California & Colorado).
The maker does not ship a filter with this furnace. The size above is the maker's recommended size at the furnace; if your home has a filter grille in a wall or ceiling, that grille sets the size instead.
How often to change it
General guidance, not from the maker's table: 1-inch filters every 1 to 3 months; 4- and 5-inch filters every 6 to 12 months. Change sooner with pets, smoking or construction dust.
About this model
| Cabinet width | 14.5 in. |
|---|---|
| Airflow direction | upflow/horizontal |
| Heat input | 40,000 BTU/hr |
| Efficiency (AFUE) | 80.0% |
| Model number note | trailing revision letter(s) vary |
| Also sold as | American Standard (same model number; IOM/IG boilerplate: "Trane and American Standard create comfortable...") |
How to read a Trane model number
Source
- Installation, Operation, and Maintenance FNR-SVX007A-EN (L8V1) (Apr 2026) (installation manual (IOM), page 32): document. Read 2026-11-03.
- Trane 2026 Residential & Light Commercial Product Handbook 22-8301-39 (product catalog / handbook, page 86): document. Read 2026-11-03.
Check that the model number on your furnace label matches, and compare with the size printed on your old filter. If they differ, go by the filter that fits your rack.