Brands › American Standard › XC95m (TUHM)
American Standard AUHMB080CCV3VA furnace filter size
This furnace takes a 17 x 25 x 1 filter (not stated (spec table, upflow model) or upflow (bottom or side, in blower compartment) return).
Every filter option for this model
| Where return air enters | Filter size (inches) | How many |
|---|---|---|
| not stated (spec table, upflow model) | 17 x 25 x 1 | 1 |
| upflow (bottom or side, in blower compartment) | 17 x 25 x 1 | 1 |
Where the filter goes
Upflow: factory supplied, in blower compartment bottom or side.
The maker ships a filter with this furnace.
How often to change it
General guidance, not from the maker's table: 1-inch filters every 1 to 3 months; 4- and 5-inch filters every 6 to 12 months. Change sooner with pets, smoking or construction dust.
About this model
| Cabinet width | 17.5 in. |
|---|---|
| Airflow direction | upflow/horizontal |
| Heat input | 80,000 BTU/hr |
| Efficiency (AFUE) | 97.0% |
| Model number note | trailing revision letter varies; "-H" suffix in PSD = horizontal rating column Same furnace as Trane TUHMB080CCV3VA, per the maker's document. |
| Also sold as | Trane TUHMB080CCV3VA |
How to read a American Standard model number
Source
- Trane Preliminary Product and Submittal Data XC95m TUHM/TDHM FNR-PSD013B-EN (Mar 2026) (product and submittal data (spec sheet), page 8): document. Read 2026-11-03.
- Installer's Guide 18-CD30D1-21-EN (*UHM/*DHM, XC95m) (2023) (installation manual, page 11): document. Read 2026-11-03.
Check that the model number on your furnace label matches, and compare with the size printed on your old filter. If they differ, go by the filter that fits your rack.