Brands › American Standard › XC95m (TDHM)
American Standard ADHMB060CCV3VA furnace filter size
This furnace takes 2 filters, each 14 x 20 x 1 (downflow top (external, in return duct) or downflow top (external)).
Every filter option for this model
| Where return air enters | Filter size (inches) | How many |
|---|---|---|
| downflow top (external, in return duct) | 14 x 20 x 1 | 2 |
| downflow top (external) | 14 x 20 x 1 | 2 |
Where the filter goes
Downflow: two filters factory supplied, external in return duct.
The maker ships a filter with this furnace.
How often to change it
General guidance, not from the maker's table: 1-inch filters every 1 to 3 months; 4- and 5-inch filters every 6 to 12 months. Change sooner with pets, smoking or construction dust.
About this model
| Cabinet width | 17.5 in. |
|---|---|
| Airflow direction | downflow/horizontal |
| Heat input | 60,000 BTU/hr |
| Model number note | trailing revision letter varies Same furnace as Trane TDHMB060CCV3VA, per the maker's document. |
| Also sold as | Trane TDHMB060CCV3VA |
How to read a American Standard model number
Source
- Trane Preliminary Product and Submittal Data XC95m TUHM/TDHM FNR-PSD013B-EN (Mar 2026) (product and submittal data (spec sheet), page 11): document. Read 2026-11-03.
- Installer's Guide 18-CD30D1-21-EN (*UHM/*DHM, XC95m) (2023) (installation manual, page 14): document. Read 2026-11-03.
Check that the model number on your furnace label matches, and compare with the size printed on your old filter. If they differ, go by the filter that fits your rack.